PlaneSpottingWorld welcomes all new members! Please gives your ideas at the Terminal.

STOL

From PlaneSpottingWorld, for aviation fans everywhere
A Zenair CH 701 STOL light aircraft

STOL is an acronym for short take-off and landing, a term used to describe aircraft with very short runway requirements.

The formal NATO definition (since 1964) is:

Short Take-Off and Landing (décollage et atterrissage courts) is the ability of an aircraft to clear a 15 m (50 ft) obstacle within 450 m (1,500 ft) of commencing take-off or, in landing, to stop within 450 m (1,500 ft) after passing over a 15 m obstacle.[1]

Many fixed-wing STOL aircraft are bush planes, though some, like the de Havilland Dash-7, are designed for use on prepared airstrips; likewise, many STOL aircraft are taildraggers, though there are exceptions like the de Havilland Twin Otter, the Cessna 208, and the Peterson 260SE. Autogyros also have STOL capability, needing a short ground roll to get airborne, but capable of a near-zero ground roll when landing.

Runway length requirement is a function of the square of the minimum flying speed (stall speed), and most design effort is spent on reducing this number. For takeoff, large power/weight ratios and low drag help the plane to accelerate for flight. The landing run is minimized by strong brakes, low landing speed, thrust reversers or spoilers (less common). Overall STOL performance is set by the length of runway needed to land or take off, whichever is longer.

Of equal importance to short ground run is the ability to clear obstacles, such as trees, on both take off and landing. For takeoff, large power/weight ratios and low drag result in a high rate of climb required to clear obstacles. For landing, high drag allows the aeroplane to descend steeply to the runway without building excess speed resulting in a longer ground run. Drag is increased by use of flaps (devices on the wings) and by a forward slip (causing the aeroplane to fly somewhat sideways though the air to increase drag).

Normally, a STOL aircraft will have a large wing for its weight. These wings often use aerodynamic devices like flaps, slots, slats, and vortex generators. Typically, designing an aircraft for excellent STOL performance reduces maximum speed, but does not reduce payload lifting ability. The payload is critical, because many small, isolated communities rely on STOL aircraft as their only transportation link to the outside world for passengers or cargo; examples include many communities in the Canadian north and Alaska.

Most STOL aircraft can land either on- or off-airport. Typical off-airport landing areas include snow or ice (using skis), fields or gravel riverbanks (often using special fat, low-pressure tundra tires), and water (using floats): these areas are often extremely short and obstructed by tall trees or hills. Wheel skis and amphibious floats combine wheels with skis or floats, allowing the choice of landing on snow/water or a prepared runway. A STOLport is an airport designed with STOL operations in mind, normally having a short single runway. These are not common but can be found, for example, at London City Airport in England.

List of STOL aircraft

For a listing of STOL aircraft please see Category:STOL

References

Template:Types of take-off and landing

ar:إقلاع وهبوط قصير cs:STOL da:STOL de:STOL es:STOL fr:Avion à décollage et atterrissage court hr:STOL it:STOL hu:STOL no:STOL pl:STOL pt:STOL sl:STOL fi:STOL sv:STOL

This article is licensed under the GNU Free Documentation License.
It uses material from the Wikipedia article "STOL".